EasyManua.ls Logo

Fysic FX-9000 - 12 Possible Problems and Solutions; Problems with Outgoing Calls; Problems with Incoming Calls

Fysic FX-9000
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
12 POSSIBLE PROBLEMS AND SOLUTIONS
12.1 PROBLEMS WITH OUTGOING CALLS:
• You hear no dialing tone:
− The outside line is being used by another handset. Wait until this
call is ended and try again.
− Check the connection between the base and your telephone socket
(when in doubt, connect another phone to your telephone socket)
• The power supply is lost:
−
Check whether the adaptor is plugged into the bottom of the base
and make sure that the power adaptor is inserted into the wall socket.
12.2 PROBLEMS WITH INCOMING CALLS:
• No notification of incoming calls:
− The bell is disabled; enable it.
− Check the connection between the phone and your telephone sock-
et (when in doubt, connect another phone to your telephone socket)
• You’re always in a conversation:
− Check whether there’s a 2nd telephone with its receiver next to the
phone.
− Check is another handset registered on your telephone is keeping
the line busy.
− Connect another phone to your phone connection, and use this to
check whether the malfunction originates from your connection or
your carrier.
• Handset switches itself off when ringing:
− The batteries cannot supply enough power for the ring tone. Clean
the battery contacts or replace the batteries.

Related product manuals