G-Tec ZP120LCD - 5.6 Turn Off the UPS; 5.7 Audible Alarm Mute Function; 5.8 Operation Procedure of External Battery for Long Backup Time Model (S Model)

-18-
5.6 Turn Off the UPS:
(1) In Inverter Mode:
Press “OFF” button continuously for more than 1 second to turn
off the UPS. Then the UPS will get into self-test status first. After
having finished the self-test, the UPS will get into no output or
bypass mode. At this time, the UPS might has output if bypass is
enabled. Disconnect the utility power to turn off the output.
(2) In Battery Mode:
Press “OFF” button continuously for more than 1 second to turn
off the UPS. Then the UPS will get into self-test status first. After
having finished the self-test, the UPS will be turned off
completely.
5.7 Audible Alarm Mute Function:
If the alarm is too annoying in battery mode, you may press “ON”
button continuously for more than 1 second to clear it. Moreover,
the alarm will be enabled when the battery is low to remind you to
shutdown the load soon.
5.8 Operation Procedure of External Battery for Long
Backup time Model (“S” Model)
The units with CE markings—
(1) Use the battery pack with voltage: 36VDC for ZP120LCD 1KS
(3 pcs of 12V batteries), 96VDC for ZP120LCD 2KS/3KS/ (8 pcs
of 12V batteries). Connection of batteries more than or less than
required will cause abnormality.
(2) One end of the external battery cord is a plug for connecting the
UPS and the other end has a plug for connecting the user
battery cabinet.