Administrative Tool
p. 56
Grow RAID device
Select devices to be added to the RAID device. The list will display unassigned physical drives.
Remember to perform balance on any modification of RAID structure.
The following table describes the labels on the screen:
Name The name of the RAID
Level The level of the RAID
Devices Choose physical drive to join the RAID array
NOTE: Remember to perform balance on any modification of RAID structure.
For best practice we recommend using all drives of the same capacity. If your system happens to
have drives of different capacities, please make sure to have drive of the same capacity within one
RAID. This approach will help to ensure data integrity and security, it’s also associated with correctly
storing and fetching the data.
Remove devices from RAID
Select devices to be removed from the RAID device. Repeat the steps if you need to remove more
than one physical drive.
To Next Page
Loading...