19
2019/9/18V1.1+V1.0
C3
During exercise press this key
to increase speed
During treadmill mode, press this key to increase speed, max is 15.6mph (25km), STEP 0.1.
During pushing mode, press this key to increase pushing power, minimum is THRUST
LEVEL 15, STEP 1.
C4
During exercise press this key
to decrease speed
During treadmill mode, press this key to decrease speed, minimum is 0.3mph( 0.5km)，STEP
0.1.
During pushing mode, press this key to decrease pushing power, minimum is THRUST
LEVEL 0, STEP 1.
D ENTER
Confirm the digital number for program setting or specific case selection, such as exercise
time, speed, weight, distance, exercise target, gender, and target heart ratio and so on. Use
SPEED”+”,”-“to input information, press ENTRE to confirm.
E MODE
Selection of PROGRAM theme, include GOAL‧HRC‧PHYSICAL TEST‧PROGRAM‧
TRAINING‧FIT TEST. Under pushing mode, only GOAL,HRC, Thrust INTERVAL, Thrust
INTERVAL CUSTOM is valid.
F QUICK START
Press this key to get fast entrance to the user preset mode, no need to choose program
setting, during program execution process, use direction key or digit key to adjust incline and
speed (pushing power).
The initial speed is 0.6mph(1km).
G1 Heartbeat ratio display Show the heartbeat ratio when the user use sensor or breast band heart rate belt.
G2 Sectional heartbeat ratio panel
Input the user’s age to calculate according to the formula and then take the result to show the
current heartbeat ratio sectional display, this function cannot be valid unless the age is input.
H Pause/stop
During exercise, press this key once to enter into pause status, press again to back to
standby status.
I Incline 3,6,9 fast key
During treadmill mode and pushing mode, press this key, incline will do 3,6,9 fast switch.
(Under PROGRAM to set LEVEL program, during exercise, this key is invalid.)
J Speed 3,6,9 fast key During treadmill mode, press this key, speed will do 3,6,9 fast switch.
To Next Page
Loading...