13
2019/9/18V1.1+V1.0
3.3. Assembly steps
In case of danger, the machine assembly must be jointly carried out by two or more people and do not assemble alone.
STEP 1
Use the magic belt attached to the left and right treadmill’s hand-stand pipes to tighten the wires on both sides of the platform. Pass it
through the square hole at the bottom of the left and right treadmill’s hand-stand pipes and pull it above the pipe.
Fix the left and right treadmill’s hand-stand pipes (D, E) by screw (A), spring (b) and washer (C) without fastening.
※
Please be careful not to clip the wire when assembling
To Next Page
Loading...