33
2019/9/18V1.1+V1.0
Running machine program operation range
While setting the HILL, RANDOM 5km and 10km trainings, the incline shall be selected, this is divided into 20 levels.
As figure
The electronic meter displays the above information in the form of column graph. The height of the column means the height of the
incline, and the level could be modified by the UP-DOWN key or digit key.
The instruction of the program under the pushing power operation thrust mode
Time Goal
Set the target time according to the target distance, when the target is achieved, the program will stop running.
Setting Range: Time Preset: 20min Range: 10-95
Distance Goal
This program serves to test the endurance of the user. When the user completes the set miles within limited time and reaches
the goal, the program will stop operation automatically.
Setting range: (treadmill mode) distance preset 5 km/ range 1-99
(pushing operation thrust mode) distance preset 1 km/ range 1-99
Calories Goal
To Next Page
Loading...