Gaggenau DF480100 - Switching on the Appliance; Setting a Programme; Setting Additional Functions; Setting Timer Programming

operation en
39
2. If the electric childproof lock is ac-
tivated, press on the upper middle
section of the appliance door twice
with a short interval in between.
a The appliance door will open auto-
matically.
15.2 Switching on the appli-
ance
▶ Press ⁠.
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
15.3 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
▶ Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
▶ Press the button for the relevant
additional function.
→"Additional functions", Page22
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
2. Press or repeatedly until the
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
by "Finish in" (e.g. 3h25min) or
"Finish at" (e.g. 15:20hours). You
can change this setting in the Ba-
sic settings.
3. To activate timer programming,
press ⁠.
Note:To deactivate timer program-
ming, press for approx.
4seconds.
15.6 Starting the programme
▶ Press .
a The programme has ended when
the display shows "Finished!".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page40