Gaggia TITANIUM User Manual

ENGLISH
• 35 •
RINSING
Immediately after heating up, the appliance automatically eliminates
the water left standing in the internal circuit to ensure that only fresh
water will be used to make coffee.
The function is activated in the factory.
• To deactivate it, go to the programming mode and press “∧” or
“∨” to select the function:
RINSING
and enable it by pressing “MENU/OK”. The following message will
appear:
RINSING
ON
Now press “∧” or “∨”to select
RINSING
ON
RINSING
OFF
and store the selection by pressing “MENU/OK”.
We recommend selecting:
RINSING
ON
LANGUAGE
This function allows you to change the language of the display. You
can choose among Italian, German, Portuguese, Spanish, English,
French and Dutch. The appliance is normally set on the language of
the country it is to be sold in.
• After accessing the programming mode, press
“∧” or “∨” to select
the function:
LANGUAGE
and then enable it by pressing“MENU/OK”.
The display will show:
LANGUAGE
ENGLISH
Press “∧” or “∨” to select the desired language and then press
“MENU/OK” to memorise it.
WATER HARDNESS
The hardness of tap water may vary from region to region. For this
reason, the appliance may be adjusted according to the degree of
hardness of the water in the place it will be used in; hardness is
measured on a scale of 1 to 4.
The appliance is already programmed for an average value
(hardness 3). The appliance setting should be adjusted according to
the actual hardness of the water, which can be measured using the
test strip provided.
Briefly dip (1 second) the test strip provided in water and
shake it gently. After one minute you can read the test results
on the strip.
• After accessing the programming mode press “∧” or “∨” to select
the function:
WATER HARDNESS
and enable it by pressing “MENU/OK”.
• The display will show:
WATER HARDNESS
HARDN 3
• Check the test strip previously immersed in water to see how many
squares have changed colour.
• Press “∧” or “∨” to select the correct water hardness (e.g. 2 squares
= Hardness 2) and memorise it by pressing “MENU/OK”.
Caution: descale the appliance when the max water
hardness level is reached.
The display will show the message:
DESCALING
READY FOR USE

Gaggia TITANIUM Specifications

General

Type	Coffee/Espresso
Dimensions (WxDxH)	280 x 385 x 390 mm
Milk tank	No
Product type	Espresso machine
Built-in grinder	Yes
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.3 L
Maximum operating pressure	15 bar
Product color	Silver

Weight and Dimensions

Weight	10000 g