EasyManuals Logo

Gaggia TITANIUM User Manual

Gaggia TITANIUM
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
ENGLISH
• 37 •
TOTAL COFFEES
This function allows you to display how many coffees the appliance
has made to date.
After accessing the programming mode, press
or to select
the function:
TOTAL COFFEES
enable it by pressing
MENU/OK”. The display will show, for
example:
TOTAL COFFEES
86
TIMER
This coffee maker features a new function that allows you to save energy
in case of long periods of quiescence. This function, which is factory set,
automatically switches the machine from the
SELECT PRODUCT
READY FOR USE
status to the
ENERGY SAVING
mode after 3 hours have elapsed since the previous use.
The switch-off time can be set at 15-minute intervals, down to a
minimum of 15 minutes. The function may not be disabled.
In the programming mode press
or to select the
TIMER
function and activate it by pressing
“MENU/OK”.
The display will show:
STANDBY
AFTER: 3:00
Press
or to select the desired setting and press
“MENU/OK” to store it.
Note: if ON/OFF times have been activated through
the “CLOCK” function, this function will be ignored.
CLOCK
This function may be activated and deactivated by the user. It is used
to:
- display the current time when the machine is in the ENERGY
SAVING or FUNCTION SELECTION mode;
- program the machine to switch on and off at a specific time.
In order for the programming function to work properly, you must set
the clock to the current time.
Press or to select the function:
CLOCK
enable it by pressing MENU/OK”.
Press or to select the function:
CLOCK TIME
enable it by pressing MENU/OK”.
Press or to set the current hour and memorise it by pressing
“MENU/OK”;
CLOCK TIME
1:18
Then press or to set the minutes and memorise the setting
by pressing MENU/OK”.
The clock is set and the machine will go back to the previous
menu.
Note: keeping the buttons pressed down will allow you
to go through the numbers quickly.
Note: the clock setting is also maintained when the
machine is off
Displaying the time
press or to select the function
SHOW CLOCK TIME
and enable it by pressing “MENU/OK”.
press
or to activate or deactivate the function

Other manuals for Gaggia TITANIUM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gaggia TITANIUM and is the answer not in the manual?

Gaggia TITANIUM Specifications

General IconGeneral
TypeCoffee/Espresso
Dimensions (WxDxH)280 x 385 x 390 mm
Milk tankNo
Product typeEspresso machine
Built-in grinderYes
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Appliance placementCountertop
Water tank capacity2.3 L
Maximum operating pressure15 bar
Product colorSilver
Weight and Dimensions IconWeight and Dimensions
Weight10000 g

Related product manuals