3E2374 Sheep Auto Drafter User Manual
Page 15
ASSEMBLING THE SHEEP AUTO
DRAFTER AND SORTING UNIT
Assembling the Sheep Auto Drafter
The Sheep Auto Drafter should be assembled when you purchase it. All you will
need to do is attach the following:
• air supply
• power supply
• scale indicator (if using)
• RFID reader (if using)
• sorting unit(s) (if using)
Attaching the scales indicator and RFID reader
To find out how to do this see How to turn the Sheep Auto Drafter on (p 28).
Assembling the sorting unit
After you purchase the sorting unit you will need to assemble it. The following
instructions explain how to do this.
Figure 7. Drafting unit components
Tools required
• 3/8in socket
• 13mm socket
• 17mm combination spanner
To Next Page
Loading...
