3E2374 Sheep Auto Drafter User Manual
Page 27
Button Button
name
Action Reasons fo use
Entry Gate Open and close the
entry gate.
To stop the unit operation
and open the entry gate,
(e.g. if you want to remove a
sheep when two have got
into the unit, or to let out a
sheep which is jammed in
the gate).
To shut the unit entry gate.
To enter stop mode (ie entry
closed, exit open)
Start the Sheep Auto
Drafter in Automatic
Release Mode.
The unit has been powered
on and the remote is not
available.
The Entry Gate button on
the Control Bridge, remote
control or STOP button was
used to override the entry
gate.
A fault condition has been
corrected.
Table 3. Function of Entry Gate button on Control Bridge
To Next Page
Loading...
