Gallagher SmartPower MBX2500

To Next Page

Solveig Pourquier et Jean-François Levet – Lycée Lachenal – Argonay (74) – Académie de GRENOBLE

Advanced

Lightning

Protection

Power Supply

• 110-230V, battery, solar, generator

• high protection against poor power supply

Stored Energy

Indicates how hard the energizer is working

Output Voltage

Shows voltage at the energizer

Output Alarm

Warns if Output Voltage has fallen below a

pre-set level

Fence Voltage

Monitors the quality of the fence

Fence Alarm

Warns if Fence Voltage has fallen below

a pre-set level (includes Security option)

Earth Voltage

Monitors the quality of the earth

system

Earth Alarm

Warns if Earth Voltage has risen

above a pre-set level

ON/Standby

Indicates standby, normal operation or

electrical interference

Mains/Battery

Shows whether the energizer is

operating from mains or battery power

and indicates low battery

Output Terminal

connects to fence

Earth Terminal

connects to earth

Reference Earth Terminal

connects to reference earth

Fence Terminal

connects to section of

fence being monitored

Remote Control:

The convenience of

being able to turn the

Energizer ON or

OFF anywhere the

fence is powered

Switches/Connections on

back of energizer :

1. Output Alarm

2. Fence Alarm

3. Earth Alarm

4. Remote Control Codes

5. Battery Save

6. Remote Control Disable

7. Remote Control Electrical

Interference

8. Connection for MBX Alarm

Controller

9. Battery Connection

10. Mounting Holes

IMPORTANT: After changing

switch settings, it is recommended

that the switch cover is replaced

(to prevent insects entering).

Your SmartPower Energizer Gallagher 3E0795 SmartPower MBX User Manual

YOUR SMARTPOWER ENERGIZER...

…can operate from mains power only, or with a battery back-up or with battery only

Need help?

Do you have a question about the Gallagher SmartPower MBX2500 and is the answer not in the manual?

Summary

SmartPower Energizer Front Panel Overview

Operational Indicators

Displays status for Stored Energy, Output Voltage, Fence/Earth Voltage, and operational modes.

Power Supply and Protection

Covers power options (mains, battery, solar) and advanced lightning protection.

Connection Terminals

Details terminals for Output, Fence, Earth, and Reference Earth connections.

Back Panel Switches and Connections

Alarm and Control Switches

Switches for Output Alarm, Fence Alarm, Earth Alarm, Remote Control Codes, and Battery Save.

Configuration and Connectivity

Settings for Remote Control Disable, Electrical Interference, MBX Alarm Controller, and Battery Connection.