What to do if the battery indicator is solid red on my Gallagher S40 Power Supply?
A solid red battery indicator means the battery capacity is low, likely due to insufficient sunlight. Ensure the energizer is getting enough sun. You can also turn the energizer off for 3 days and leave it in the sun to charge the battery, or connect a Recharge Kit (G40110) to charge the battery.
What to do if there is no voltage on the fence connected to my Gallagher S40 Power Supply?
The energizer may have been damaged by lightning. To check, disconnect the energizer from the fence and earth. Measure across the fence and earth terminals with a Gallagher Fence Volt Meter. If the reading is less than 5 kV, return the energizer for service. If it's more than 5 kV, the fault is with the fence.
How to fix a solid red battery indicator on Gallagher S40?
If the Battery indicator on your Gallagher Power Supply is solid red, it indicates that the battery capacity is low due to insufficient sunlight. To resolve this: * Ensure the energizer is getting enough sunlight. * Turn the energizer off for 3 days and leave it in the sun to charge the battery. * Remove the battery and use a 6V 1.2A charger to charge it.
What to do if the battery indicator flashes red on Gallagher Power Supply?
If the Battery indicator on your Gallagher Power Supply flashes red, it means there's either no battery connected or an incorrect battery is connected. Make sure to connect the correct battery.
Why is the fence voltage indicator flashing red on my Gallagher Power Supply?
The output voltage might be too low because of a high load on the fence line. First, check that the battery is OK using the battery check function. If the battery is fine, inspect the fence and earth system for any faults.
What to do if the battery indicator flashes red on my Gallagher S40 Power Supply?
A flashing red battery indicator means there is no battery connected or an incorrect battery is connected. Connect the correct battery.
What to do if the Fence Voltage indicator flashes red on my Gallagher Power Supply?
If the Fence Voltage indicator is flashing red on your Gallagher Power Supply, it means the output voltage is too low because there's a high load on the fence line. First, use the battery check function to ensure the battery is working correctly. If the battery is fine, inspect the fence and earth system for any faults.
General| Brand | Gallagher |
|---|---|
| Model | S40 |
| Category | Power Supply |
| Language | English |
Covers child supervision, entanglement, and general safe operation guidelines.
Details earthing, wire placement, barbed wire rules, and fence construction safety.
Includes warnings on battery charging, user contact, and fence supply configuration.
Specifies minimum distances and heights for fence wires near power lines.
Details requirements for warning signs and safe passage at public crossings.
Covers weather protection and electrical isolation for connected equipment.
Displays battery status (OK, charging, or needs charging).
Controls power and selects operating modes (OFF, 1/2 Power, Full Power).
Detects day/night to manage energizer operation.
Keep clean for optimal battery charging from sunlight.
Earth and Fence terminals for connecting the energizer to the system.
Shows fence voltage status (OK or low).
Covers mounting options and how to access the battery compartment.
Port for connecting a recharge kit to charge the battery.
Steps for opening, connecting the battery, and closing the unit.
How to orient the solar panel for optimal sun exposure.
Instructions for connecting the earth stake and fence wires.
Final step to switch the energizer on after installation.
Explains '1/2 Power' and 'Full Power' modes for animal control.
How the energizer conserves power during prolonged low sunlight periods.
Illustrates how to recharge the energizer using solar or mains power.
Advice on installation location, panel cleaning, and testing voltage.
Troubleshooting for solid red or flashing red battery indicator lights.
Diagnosing low fence voltage or no voltage issues.
Guidelines for recharging and storing the battery and energizer.
Information on maintenance-free batteries and correct replacement types.
Procedures for safely removing and disposing of batteries.
Details model, battery, current draw, energy output, voltage, and dimensions.
Instructions for proper disposal of the product and its battery.
To Next Page
