Why is the battery indicator solid red on my Gallagher Power Supply?
A solid red battery indicator on your Gallagher Power Supply usually means the battery capacity is low due to insufficient sunlight. To resolve this: * Ensure the energizer is getting enough sun. * Turn the energizer off for 3 days and leave it in the sun to charge the batteries. * Connect a Recharge Kit (G40110) to charge the battery.
What to do if the battery indicator flashes red on my Gallagher S200 Power Supply?
If the battery indicator flashes red on your Gallagher Power Supply, it indicates that either no batteries are connected or incorrect batteries are connected. To fix this, connect the correct batteries or replace both batteries.
How to fix a Gallagher Power Supply with a solid red battery indicator?
If the battery indicator on your Gallagher Power Supply is solid red, it means the battery capacity is low because it's not getting enough sunlight. Here's what you can do: * Make sure the energizer is getting enough sunlight. * Turn the energizer off for 3 days and leave it in the sun to charge the batteries. * Remove the batteries and use a 12V 1.2A charger to charge them.
What to do if there is no voltage on my Gallagher S200 fence?
If you find no voltage on your Gallagher Power Supply fence, the energizer might have been damaged by lightning. To check if the energizer is faulty: * Disconnect it from the fence and earth. * Measure the voltage across the fence and earth terminals using a Gallagher Fence Volt Meter. If the reading is less than 5 kV, return the energizer for service. If it's more than 5 kV, the issue lies with the fence or earth system.
Why is the fence voltage indicator flashing red on my Gallagher Power Supply?
If the Fence Voltage indicator on your Gallagher Power Supply is flashing red, it means the output voltage is too low due to a high load on the fence line. You should check the batteries using the battery check function and inspect the fence and earth system for faults.
General| Input Voltage | 12V DC |
|---|---|
| Output Voltage | Up to 10, 000 V |
| Operating Temperature | -10°C to +50°C |
| Battery Type | 12V 7Ah Lead Acid |
| Power Source | Battery |
| Power | 200 Joules |
| Protection Features | Short circuit protection, Overload protection |
Covers procedures for recharging, storing the energizer, and handling batteries.
Details on maintenance-free batteries, replacement procedures, and recommended battery types.
Instructions for safely removing and disposing of batteries according to regulations.
Lists advantages of registering product online for customer support and updates.
Outlines the terms of the warranty, coverage period, and repair/replacement policy.
Specifies damages and situations not covered by the warranty.
To Next Page
