What to do if the fence voltage indicator flashes red on my Gallagher Fencing & Gates?
If the fence voltage indicator flashes red, it means the output voltage is too low because of a high load on the fence line. First, check the batteries are OK using the battery check function. Then, check the fence and earth system for faults.
How to fix a Gallagher Fencing & Gates with a solid red battery indicator?
If the battery indicator is solid red on your Gallagher Fencing & Gates, it means the battery capacity is low due to insufficient sunlight. Make sure the energizer is getting enough sun. You can also turn the energizer off for 3 days and leave it in the sun to charge the batteries. Alternatively, remove the battery and use a 12 V 1.2A charger to charge it.
What to do if the battery indicator flashes red on Gallagher Fencing & Gates?
If the battery indicator flashes red on your Gallagher Fencing & Gates, it means there are no batteries, incorrect batteries are connected, or the batteries are damaged. Connect the correct batteries or replace both batteries.
Details product warranty terms, exclusions, and conditions for material and workmanship defects.
General| Brand | Gallagher |
|---|---|
| Model | S400 |
| Category | Power Supply |
| Language | English |
To Next Page
