Gallagher W310 v2 - The Mode Select Switch

 3E2362WeighScaleW310v2UserManual

Page8

THEMODESELECTSWITCH
TheWeighScalecanoperateinthreeweighingmodesandasetupmode.The
modeselectswitchislocatedonthelefthandsideoftheWeighScale.

Themodeselectswitchhasfivepositions: ,A,M,FandS.Immediatelyafter
youturntheswitchtoanypositionexcept ,explanatoryinformationwill
displayonthelowerofthetwoWeighScalescreens.Theexplanatory
informationwilldisplayonlyforafewseconds;afteritdisappears,thescreen
displaysinformationrelevanttotheselectedoption.

ThispositionturnstheWeighScaleoff.
A
Thispositionselectsautomaticweighing.Afterthemodeselectswitchis
firstturnedtoA,thefollowinginformationbrieflyappears.
AutomaticweighingiscoveredunderWeighinganimals‐automaticor
manualmodes(p25).
M
Thispositionselectsmanualweighing.Afterthemodeselectswitchis
firstturnedtoM,thefollowinginformationbrieflyappears.