Gallagher W310 v2 - Page 27

3E2362WeighScaleW310v2UserManual

 Page23

Staticloads
Deletetheweightaftertheloadhasbeenremovedfromtheplatform
ThisfeatureisavailablewhentheWeighScaleissettotheFinemode.
Afterthestaticloadhasbeenremovedfromtheplatformandbeforeanother
loadisplacedontheplatform,youhaveanopportunitytodeletefromthe
statisticstheweightjustcaptured.
Todeletetheweight,pressthereddeletebutton.
Thelastcapturedweightwillberemovedfromthestatisticsandthelower
screenwillbrieflydisplaythefollowingmessage.

Note:
Youcanonlydeletethelastweightcapturedfromthestatistics.Weights
capturedpriortothelastcannotberemovedbypressingthedeletebutton
again.