Gallo Tech GTS-3RS - Page 5

© Copyright
Gallo Technologies
. All Right Reserved
-
5
-
0
615
1
5
V54RS
To Turn ACC, IGN 1and IGN 2 ON/OFF with no engine start.
Press
“
Start Stop Engine
”
button and hold for 1.5 sec. without pressing the brake/clutch peddle, A
CC,
IGN 1 and IGN2 will turn ON and the engine will not start. To turn ACC, IGN1 and IGN2 OFF, press
and hold for 1.5 sec.
“
Start Stop Engine
”
button
, or w
hen the RFID key FOB is taken out of range,
ACC, IGN1 and IGN2 will turn OFF automatically
.
To Start / Stop Engine.
To Start Engine:
While
pressing the brake peddle
,
Press
“
Start Stop Engine
”
button and hold
until the
engine starts.
IGN 1 will turn ON
,
the starter will engage
and the engine will start.
After the engine has
started, release the
“
Start Stop Engine
”
button
,
ACC, IGN1 and IGN2
will turn ON.
To Stop Engine:
press “
Start Stop Engine
”
button
for 1.5 sec. IGN 1 and IGN 2 will turn OFF and the
engine will stop. ACC will remain ON until (a.) the
“
Start Stop Engine
”
button
is pressed one time, or,
(b.) the key FOB is moved out side the vehicle and is out of range.