ELECTROMAGNETIC COMPATIBILITY
ELECTROMAGNETIC COMPATIBILITY INFORMATION ACCORDING TO IEC/EN 60601-1-2
Table 1 for Emissions
GUIDANCE AND MANUFACTURER’S DECLARATION –
ELECTROMAGNETIC EMISSIONS
The GRPro 2.1 is intended for use in the electromagnetic environment specified below. The customer
or the user of the GRPro 2.1 should assure that it is used in such an environment.
Emissions tEst ComplianCE ElECtromagnEtiC EnvironmEnt – guidanCE
RF emissions CISPR 11 Group 1 The GRPro 2.1 uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions CISPR 11 Class B The GRPro 2.1 is suitable for use in all
establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Complies
EN-15
To Next Page
Loading...
