24
GB
Rain Off function:
1.
2.
3.
Key lock:
E.g. In case of 60% run-time, a programmed watering duration
of 60 min. is reduced to 36 min.
Note:
When the percentage of the watering duration is changed the
display of the originally programmed watering durations in the
programs stays as it is. When setting up / modifying a program,
this is automatically set to
100 % Run-Time
. The
% Run-Time
does not apply to manual watering.
Watering Breaks (Rain Off Key)
You can end the programming mode at any time by pressing the
Rain Off key.
If watering is not necessary, e.g. due to lengthy rainfall, a
watering break can be set. All the programs can be set for a
1 to 9-day break ( 1 to 9 ) or they can all be blocked (Off ),
in which case manual watering is still possible.
1. Press the Rain Off key.
Rain Off
and
Off
is displayed.
2. Using the ▲-▼ keys, set the desired break
(e.g. 3 days 3 ).
Day Delay
and the frame flash.
3. Confirm the break by pressing the OK key.
The selected break (e.g. 3 days
3 Days Off
) is displayed and
the programs are suspended for the break selected.
From 2 days onwards, the remaining break period displayed in
hours (
48h off
(48 hours) …
1h off
(1 hour)).
To deselect the Rain Off function the Rain Off key has to
be pressed.
The keypad can be locked to protect against unintentional
changing of the settings.
1. Press and hold down the OK key.
2. Also press and hold down the Rain Off key for 3 seconds.
The lock symbol is displayed.
To disable the key lock, the OK key + Rain Off key have to be
pressed and held down for 3 seconds.
To Next Page
Loading...
