To Next PageTo Next Page
Need help?Do you have a question about the Gardena 7000 and is the answer not in the manual?
General| Brand | Gardena |
|---|---|
| Model | 7000 |
| Category | Water Pump |
| Language | English |
Describes the intended purpose and use cases for the GARDENA pumps in domestic environments.
Details the types of liquids suitable for pumping, including particle size limitations and exclusions.
Provides critical warnings about continuous operation, prohibited substances, and liquid temperature limits.
Outlines essential safety measures related to electrical connections, residual-current devices, and cable specifications.
Instructions for performing a pre-operation visual inspection of the pump for damage.
Safety guidelines for operating the pump manually, emphasizing switching it off when liquid is removed.
Important usage notes including avoiding dry running, limiting operation against closed delivery, and pump placement.
Specific setup instructions for the submersible pump 7000, including swivel feet adjustment.
Explains the function of the automatic deaerating valve and how water might exit ventilation holes.
Describes the function of the thermal protection switch and its automatic reset mechanism.
Details how to connect hoses using the universal fitting and required connection kits.
Step-by-step guide on connecting hoses to the universal fitting, including recommended clamps.
Explains how the float switch controls automatic pump operation based on water levels.
Guides users on how to adjust the pump's automatic start and stop levels using the float switch lock.
Describes the steps for manual operation, bypassing the float switch for constant running.
Details how to adjust swivel feet for flat suction (1mm) and normal operation (5mm).
Instructions for storing the pump safely before frost sets in to prevent damage.
Guidance on environmentally friendly disposal of the product in accordance with regulations.
Recommends rinsing the pump with clear water after pumping certain liquids to maintain performance.
Provides detailed steps for cleaning the pump's suction base and impeller, with safety warnings.
Lists probable causes and remedies for a pump that runs but fails to pump liquid.
Addresses issues where the pump fails to start or stops unexpectedly, including thermal overload.
Continues troubleshooting for pump start/stop issues, including power and dirt jamming.
Explains reasons for reduced pump output, such as a clogged suction base.
Troubleshoots issues related to the submersible pump 7000 not achieving the 1mm residual water height.
Presents detailed technical specifications for both pump models, including power, capacity, and dimensions.
Clarifies how cut-in/cut-out height varies and is achieved during manual operation for the 7000 model.
Details the 2-year guarantee terms, conditions, and exclusions for GARDENA products.
Provides instructions on how to contact service or return a defective unit for repair or warranty claims.
