To Next Page
L
lambguySep 12, 2025
What to do if Gardena R80Li is upside down?
- JJohn SnyderSep 12, 2025
If your Gardena Lawn Mower is upside down, it means it is leaning too much or has turned over. Turn the mower the right way up.
What to do if Gardena R80Li is upside down?
If your Gardena Lawn Mower is upside down, it means it is leaning too much or has turned over. Turn the mower the right way up.
Why Gardena R80Li mows for shorter periods?
If your Gardena Lawn Mower is mowing for shorter periods than usual between charges, grass or another foreign object may be blocking the blade disc. Remove and clean the blade disc.
Why does my Gardena Lawn Mower say no loop signal?
A 'no loop signal' error on your Gardena Lawn Mower can occur for several reasons. It could be due to the transformer not being properly connected, so check the wall socket and the connection of the low voltage cable to the charging station. Also, the boundary wire might not be correctly connected to the charging station. In some cases, metal objects or buried cables nearby can cause disturbances; try moving the boundary wire. Finally, the connection between the mower and the charging station might be broken. To fix this, place the mower in the charging station and generate a new loop signal via Security -> New loop signal.
What to do if Gardena R80Li cutting system blocked?
If the cutting system of your Gardena Lawn Mower is blocked, it's likely due to grass or another object wrapped around the blade disc. Check the blade disc and remove any obstructions. Alternatively, the blade disc might be sitting in a pool of water. If this is the case, move the mower and try to prevent water from collecting in that area.
Why Gardena R80Li Lawn Mower has no drive?
If your Gardena Lawn Mower has no drive, it could be because it has gotten caught on something. Free the mower and identify the reason for the lack of drive. If wet grass is the cause, wait until the lawn dries before using the mower. Also, if the working area includes a steep slope, this could be the reason. Maximum guaranteed slope is 25%. Steeper slopes should be isolated. Another reason could be that the guide wire is not laid at an angle on a slope. If the guide wire is laid on a slope, it must be laid at an angle across the slope.
How to fix Gardena R80Li left wheel motor blocked?
If the left wheel motor of your Gardena Lawn Mower is blocked, it's likely because grass or another object has wrapped around the drive wheel. Inspect the drive wheel and remove any obstructions.
What to do if Gardena Lawn Mower goes outside working area?
If your Gardena Lawn Mower is going outside the working area, it could be due to several reasons related to the boundary wire. The boundary wire connections to the charging station might be crossed, so ensure they are correctly connected. Also, the boundary wire may be too close to the edge of the working area, laid in the wrong direction around an island, or there might be disturbances from metal objects or buried cables nearby. In any of these cases, check that the boundary wire has been laid correctly or try moving it. Another reason may be that the robotic lawnmower finds it hard to distinguish the signal from another robotic lawnmower installation close by. In this case, place the robotic lawnmower in the charging station and generate a new loop signal via Security -> New loop signal....
Why Gardena Lawn Mower vibrates?
If your Gardena Lawn Mower is vibrating, it is likely due to damaged blades causing imbalance in the cutting system. Inspect the blades and screws, and replace them if necessary.
What to do if Gardena R80Li Lawn Mower charging station is blocked?
If the charging station of your Gardena Lawn Mower is blocked, it might be because the contact between the charging strips and contact strips is poor, causing the mower to make repeated charging attempts. Ensure the mower is properly placed in the charging station and that the charging strips and contact strips make good contact. Alternatively, an object might be obstructing the mower; remove any such object.
What to do if Gardena R80Li Lawn Mower is stuck in charging station?
If your Gardena Lawn Mower is stuck in the charging station, there is likely an object preventing it from leaving. Remove the object.
Essential details for recording serial number, PIN code, and registration key.
Overview of the robotic lawnmower, its technology, and mowing benefits.
Visual guide identifying all components and accessories of the lawnmower.
Explanation of safety and operational symbols found on the robotic lawnmower.
Clarifies the meaning of warning, caution, and note symbols used in the manual.
Explains the system for warnings and text types used within the operator's manual.
Critical safety guidelines for the operation, handling, and environment of the robotic lawnmower.
Lists components and guides planning for installation, including area sketching.
Details the functions, placement, and connection of the charging station.
Step-by-step instructions for charging the robotic lawnmower's battery.
Methods and guidelines for installing the boundary wire around the work area.
Procedure for connecting the boundary wire to the charging station.
Instructions for installing the guide wire for navigation.
How to verify the correct installation of boundary and guide wires.
Initial setup, language selection, PIN entry, and guide calibration.
Testing mower docking and overview of control panel, display, and keypad.
Visual guide to menu hierarchy and setting scheduled mowing times.
Installation settings for R70Li/R80Li, security features, and general settings.
Recommended settings for various garden layouts and conditions.
Instructions for using the main power switch and starting the mower.
How to select between HOME, AUTO, and MAN operating modes.
Procedure to safely stop and completely switch off the robotic lawnmower.
Managing mowing schedules and the mower's standby periods.
Guide for charging a depleted battery and adjusting the cutting height.
Importance of regular checks and cleaning for mower longevity.
Instructions for cleaning the mower's chassis, wheels, and body.
Safety precautions and steps for replacing the mower blades.
Information on battery service life, charging, and replacement procedures.
Recommended service and preparation for winter storage.
Overview of common issues, error messages, causes, and actions.
Explains the meaning of indicator lights on the charging station for diagnostics.
Common operational problems and their recommended solutions.
Detailed guide to locate and repair breaks in the boundary wire.
Guidelines for safely transporting the product, including battery handling.
Instructions for preparing and storing the mower and charging station for winter.
Steps for recommissioning the mower after winter storage.
Guidance on the proper disposal and recycling of the product.
Procedure for safely removing the battery for recycling purposes.
Detailed specifications for R38Li, R40Li, and R45Li models.
Detailed specifications for R50Li, R70Li, and R80Li models.
Explains the product's warranty period, coverage, exclusions, and service procedures.
Manufacturer's formal statement of compliance with relevant EU directives.
General| Type | Robotic lawn mower |
|---|---|
| Cutting width | 170 mm |
| Grass catcher | - |
| Product color | Black, Blue |
| Cutting system | Rotary blades |
| Recommended lawn area | 800 m² |
| Maximum cutting height | 50 mm |
| Minimum cutting height | 20 mm |
| Grass collecting volume | - L |
| Power source | Battery |
| Charging time | 1 h |
Weight and Dimensions| Depth | 580 mm |
|---|---|
| Width | 460 mm |
| Height | 255 mm |
| Weight | 7500 g |
