What to do if Gardena SILENO City 250 Lawn Mower says 'Alarm! Mower switched off'?
If your Gardena Lawn Mower displays 'Alarm! Mower switched off,' it means the alarm was triggered because the product was switched off. Adjust the security level in the Security menu.
How to troubleshoot Gardena SILENO City 250 battery problem?
If your Gardena Lawn Mower indicates a battery problem, it could be a temporary battery or firmware-related issue; try restarting the product. Also, ensure you are using the correct type of battery, as an incorrect battery can cause problems; use original batteries recommended by the manufacturer.
Why does my Gardena Lawn Mower say 'No loop signal'?
If your Gardena Lawn Mower displays a 'No loop signal' error, several issues could be the cause. First, check that the power supply and low-voltage cables are securely connected and undamaged. If there's damage, replace them. Ensure the boundary wire is properly connected to the charging station, replacing connectors if needed. Finally, inspect the boundary wire for damage; if found, replace the damaged section.
What to do if Gardena SILENO City 250 Lawn Mower goes outside working area?
If your Gardena Lawn Mower is operating outside the designated working area, several factors could be responsible. Check that the boundary wire is correctly connected and not placed too close to the edge of the work area. Metal objects like fences or buried cables can interfere with the boundary wire, so try moving the wire away from these objects. Also, interference from a nearby product installation might be the issue, in which case, place the product in the charging station and generate a new loop signal.
How to fix Gardena SILENO City 250 Lawn Mower cutting system blocked?
If the cutting system of your Gardena Lawn Mower is blocked, the following could be the reasons: grass or other objects might be obstructing the blade disc, in which case you should remove them. If the blade disc is submerged in water, move the product to a drier area and prevent water accumulation. Also, if the grass is too high, cut it before using the product, ensuring it's no more than 4 cm / 1.6 in.
What to do if Gardena SILENO City 250 is tilted?
If your Gardena Lawn Mower is tilted, it means that the product is tilted more than the maximum angle. Move the product to a level area.
Why Gardena SILENO City 250 Lawn Mower operates at the wrong time?
If your Gardena Lawn Mower is operating at the wrong time, it could be due to an incorrect time or date setting in the product; set the correct time and date. Alternatively, the start and stop times for operation may be incorrect; adjust the schedule settings.
What causes Gardena SILENO City 250 Lawn Mower charging system problem?
If your Gardena Lawn Mower shows a charging system problem, it might be due to using an incorrect type of battery. Make sure to use original batteries recommended by the manufacturer.
How to fix Gardena Lawn Mower wheel motor overloaded?
If the wheel motor on your Gardena Lawn Mower is overloaded (left or right), the issue is likely due to grass or another object around the drive wheel. Remove any obstructions from the drive wheel.
How to fix Gardena SILENO City 250 wheel motor blocked?
If the wheel motor of your Gardena Lawn Mower is blocked (left or right), it is likely due to grass or another object obstructing the drive wheel. Remove any grass or objects to resolve the issue.
General| Model | SILENO City 250 |
|---|---|
| Category | Lawn Mower |
| Area Capacity | 250 m² |
| Working Area Capacity Tolerance | ±20% |
| Cutting Width | 16 cm |
| Cutting Height | 20-50 mm |
| Battery Type | Li-Ion |
| Battery Voltage | 18 V |
| Battery Capacity | 2.1 Ah |
| Charging Time | 60 min |
| Mowing Time per Charge | 65 min |
| Weight | 7.3 kg |
| Cutting Height Adjustment | Manual |
| Slope Capacity | 25% |
| Mulching Function | Yes |
| Charging System | Automatic |
| Maximum Incline within Working Area | 25% |
| Alarm | Yes |
| PIN Code | Yes |
| Lift Sensor | Yes |
| Tilt Sensor | Yes |
| Rain Sensor | Yes |
| Anti-Theft Protection | Yes |
| Warranty | 2 years |
| Cutting System | 3 pivoting blades |
| Blade Type | Pivoting blades |
Critical safety advice that must be read and understood before operating the product.
Recommendations for using the product safely and correctly.
Guidelines for selecting the optimal location for the charging station.
Instructions for correctly installing the charging station unit.
Initial configuration steps required before the product's first operation.
Automatic calibration of the guide wire for optimal mowing path.
Options for setting up the product's mowing schedule.
How to use the ON/OFF button and interpret the indicator lamp's status.
Step-by-step instructions to power on and start the product.
Step-by-step guide on how to safely replace the battery.
Table detailing error messages and recommended actions to fix them.
Key technical parameters including dimensions, electrical system, and antenna data.
To Next Page