Need help?Do you have a question about the Gardena SILENO+ and is the answer not in the manual?
General| Model | SILENO+ |
|---|---|
| Cutting Width | 22 cm |
| Cutting Height | 20-50 mm |
| Battery Type | Li-ion |
| Battery Capacity | 2.1 Ah |
| Charging Time | 60 min |
| Mowing Time per Charge | 65 min |
| Max Lawn Size | 1600 m² |
| Type | Robotic Lawn Mower |
| Maximum Incline | 35% |
| Battery Voltage | 18 V |
| Operating Time | 65 min |
| Area Coverage | 1600 m² |
| Warranty | 2 years |
| Blade Type | 3 blades |
Provides critical safety instructions, responsibilities, and warnings for product use and operation.
Outlines essential safety guidelines for operating the product, including warnings and precautions.
Critical safety information regarding the handling, charging, and disposal of the product's lithium-ion batteries.
Safety precautions for performing maintenance on the product and charging station.
Detailed steps for installing the charging station, including power supply connection and safety warnings.
Steps for installing the boundary wire around the entire work area, starting behind the charging station.
Instructions for connecting the guide wire to the charging station and boundary wire, including coupler usage.
Guide to using the control panel to set various product functions and parameters.
Details on setting the security level, advanced security options like new loop signal, and changing the PIN code.
Instructions for including the smart product into the GARDENA smart system app, checking status, and excluding devices.
Step-by-step guide on how to start the product, including opening the hatch, entering PIN, and selecting operating mode.
Describes the available operating modes: Main area and Secondary area for mowing operations.
Important safety warnings and procedures for charging the product's battery using the designated charging station.
Step-by-step guide on how to safely replace the blades, emphasizing the use of correct types and original screws.
Safety warnings and procedures for battery charging, replacement, and winter storage considerations.
Lists common fault messages displayed by the product, their causes, and recommended actions for resolution.
Continues the list of fault messages, causes, and actions, covering issues like wrong PIN code, no drive, and motor overloads.
Details further fault messages related to charging station issues, product orientation, and operational status.
Lists fault messages related to electronic problems, sensor issues, battery, connectivity, and settings restoration.
Covers fault messages concerning loop signal, mower tilt, connection changes, and ECO mode interference.
Final section of fault messages, including cutting system imbalance and guide wire not found issues.
Lists information messages displayed by the product, their causes, and required actions, such as low battery or settings restored.
Explains the meaning of different light indicators on the charging station for troubleshooting installation issues.
A guide to diagnosing issues based on product symptoms, such as difficulty docking, incorrect timing, or vibrations.
Continues the symptoms guide, covering uneven mowing results, dull blades, and grass accumulation.
Provides methods for locating breaks in the loop wire, including causes like physical damage and improper installation.
Details troubleshooting methods for loop wire breaks, including checking connections and using indicator lamps.
Explains how to replace damaged wire sections and use original couplers to repair loop wire breaks.
Provides detailed technical data for the product, including dimensions, electrical system, and boundary wire antenna specifications.
To Next Page
