Need help?Do you have a question about the Gardena SILENO+ Series and is the answer not in the manual?
General| Cutting Width | 22 cm |
|---|---|
| Cutting Height | 20-50 mm |
| Battery Type | Li-Ion |
| Typical Charging Time | 60 min |
| Typical Mow Time on One Charge | 65 min |
| Maximum Slope | 35% |
| Battery Voltage | 18 V |
| Battery Capacity | 2.1 Ah |
| Slope Capacity | 35% |
| Rain Sensor | Yes |
| Anti-Theft Protection | Yes |
| Smartphone Control | Yes |
| Boundary Wire Required | Yes |
| Maximum Mowing Area | 1600 m² |
| Area Capacity | 1600 m² |
| Blade Type | 3 pivoting blades |
Explanation of warning, caution, and certification symbols on the product.
Explains the system used for safety instructions and general guidelines.
Crucial safety information for operators and children, handling power supply, and batteries.
Safety rules to follow during the operation of the product.
Guidelines for correct product usage, warning signs, and modifications.
Specific safety precautions for handling the product's battery.
Guidelines for selecting the optimal location for the charging station.
Instructions on how to position the boundary wire around the work area.
Instructions on how to position the guide wire.
General steps for installing the product and its main components.
Detailed instructions for installing the charging station.
Step-by-step guide to installing the boundary wire.
Step-by-step guide to installing the guide wire.
Initial setup and calibration steps required before first use.
Overview of how to adjust product settings for optimal performance.
Instructions for setting the product's mowing schedule.
Step-by-step instructions for setting the mowing timer.
Overview of the product's security features and levels.
How to choose and set the desired security level.
Instructions for changing the product's PIN code.
Explanation of the SensorControl feature for adaptive cutting.
Overview of general settings available for the product.
Instructions for setting the product's internal clock and date.
Information and setup for connecting to the GARDENA smart system app.
Steps to put the product in inclusion mode for smart system setup.
Detailed steps for including the product in the GARDENA smart system app.
Instructions on using the main power switch for starting and stopping.
Steps to start the robotic lawnmower after installation.
Overview of the different operating modes selectable upon starting.
Detailed instructions on how to replace worn or damaged blades.
Step-by-step process for replacing the blades.
Step-by-step guide for replacing the battery.
Lists common fault messages, their causes, and recommended actions.
Guide to diagnosing and resolving issues based on observed product symptoms.
Instructions on how to locate and repair breaks in the loop wire.
Details of the product's warranty coverage and exclusions.
To Next Page