31
EN
Manual watering (On):
Changing the
watering time:
On hot or cooler days you can change the watering time.
The program you have set remains unchanged.
v Select the new watering time on the outer white scale (Run
Time Minutes) by turning the control knob and confirm your
selection by pressing the OK button (e.g.: 15 minutes).
The
Run Time
LED flashes for a half second and the watering
time is changed.
The program with the new watering time is now active.
On especially hot days the programmed watering cycle is some-
times insufficient. You can then turn on your irrigation system
manually. The program you have set remains unchanged.
v Turn the control knob to On.
The valve opens for 30 minutes independent of the set
program.
To activate the set program again, you must reset the watering
time to the time originally set.
To Next Page
Loading...
Need help?
General
