Gardena T 1030 D User Manual

24
EN
3. Function
The GARDENA Water Timer electronic allows you to set different
watering cycles for different watering times independent of whether
you are using a sprinkler, a sprinkler system installation or drip-
head watering system to irrigate your garden.
Your Water Timer electronic will water your garden completely
automati cally according to the program you choose. You can set
the timer to water your garden early in the morning or late at night
when water evaporates the least, or while you are away on holiday.
You simply program the time (to the nearest hour), day, watering
starting time / cycle / days and duration by turning the pointer
B
of the control knob
A
to the correct time and pressing the
OK button
C
.
The Water Timer opens at the starting time you have selected.
The 2 LEDs Time and Day flash to indicate that the battery is flat.
v Replace the battery (see 4. Putting Your Water Timer into
Operation “Inserting the Battery”).
The functional safety of the water timer depends on the capability
of the battery.
If you change the battery the program is not saved. You must
reprogram the Water Timer (see 5. Operation).
Control knob and OK button:
A
Control knob
B
Control knob pointer
C
OK button
Battery status display:
C
BA

Gardena T 1030 D Specifications

General

Type	Water Timer
Power Source	Battery
Watering Duration	1 min - 120 min
Operating Pressure	0.5 - 12 bar
Connection	3/4 inch
Watering Frequency	Every 8, 12, 24 hours or every 2, 3, 7 days