Gardena T 1030 D - Connecting the Water Timer

26
EN
The Water Timer is fitted with a sleeve nut
4
for taps with G1 "
(33.3 mm) thread. The adaptor supplied
5
allows the Water
Timer to be connected to taps with a G
³⁄₄
" (26.5 mm) thread.
1. For tap with a G
³⁄₄
" (26.5 mm) thread: Screw adaptor
5
on to the tap manually (do not use pliers).
2. Screw sleeve nut
4
of the Water Timer on to the adaptor
thread by hand (do not use pliers).
3. Screw tap connector
6
on to the Water Timer.
4. Open the tap.
Connecting your Water Timer:
6
5
4