EasyManua.ls Logo

Gardenline 60751 - Transporting and Storage

Gardenline 60751
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
30 31
Transporting and Storage Service Support
Transporting
CAUTION: If the engine must be tipped to transport equipment or to inspect
or remove grass, keep the spark plug (24) upwards. Transporting or tipping the
engine spark plug down may cause:
• Smoking
• Diculty starting
• Spark plug fouling
• Oil saturation of the air lter
Ensure the storage area is free from excessive humidity and dust.
Drain the fuel tank (14) and carburettor.
It is recommended to remove the spark plug cover during transportation and
storage.
WARNING: Fuel is extremely ammable and explosive under certain
conditions. Do not smoke or allow ames or sparks in the area.
NOTE: Be aware to not hit or cut the fuel tank (14) while you are transporting.
Storage
When you nish working, clean the engine completely, making sure there is
no grass or dirt on the engine.
Store the engine away from direct sunlight.
At the end of the season, give the engine an overall cleaning and a
thorough check.
Whenever the machine is not used for a long period of time, proceed
as follows:
Empty the fuel tank (14) completely.
Empty the Carburettor bowl of all fuel.
Protect all metal engine parts from corrosion by coating them with oil.
Remove the spark plug (24), put a few drops of oil into the cylinder and then
pull the recoil starter (16) 2 to 3 times in order to distribute the oil evenly.
Replace the spark plug (24). This closes the valves, and protects them from
dust and corrosion.
If storing the lawn mower back inside the box during non-use, loosen the
upper handle locking levers (5) so the upper handles can be folded, as well
loosening and removing the lower handle locking knobs (8) so the lower
handles can be removed from the lower handle mounting plates (9). Put the
lower handle locking knobs (8) back on the lower handles so they are not
lost during storage.
Coat areas that may rust with a light lm of oil. Cover the engine and store it
on a level surface in a dry, dust free area.
Ensure the cable is not tangled or folded in any way during storage.
If you have any issues with the operation of your product, please take it with a
copy of your receipt to one of our National Service Agents for repair. A listing of
our Service Agents is included at the back of this manual, however, you can also
nd our most updated listing by visiting https://help.tools/
and clicking on the Service Agent link.
Accessories and After Sales parts
Should you nd the following accessories are
worn or past their user life, replacements can
be purchased online via our website
https://help.tools/
3. Spark plug (LG F7RTC)2. Air lter (60751-AF)
1. Bar Blade (60751-BL)
4. Recoil Starter (60751-RS)
5. 51773 - 4 Stroke Full Synthetic Engine Oil
If you have any queries regarding these accessories,
please call us on our Customer Service Line - 1800 909 909.
Service Support
Transporting and Storage

Related product manuals