AC100-240V / 1200mA 50/60Hz
DC29.4V 2A
ATTENTION !
The sound power pressure may exceed 85 dB(A), in this
case individual hearing protection must be worn.
The declared vibration total value has been measured in
accordance with a standard test method and may be used for comparing
one tool with another that the declared vibration total value may also be
used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the
power tool can differ from the declared total value depending on the
ways in which the tool is used and of the need to identify safety
measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-sales service department.
To Next Page
Loading...
Need help?
General