Garmin 715 - Initial Setup and Usage

DRAFT
4 nüvi 705 Series Owner’s Manual
Getting Started
Step 2: Congure the
nüvi
To turn on your nüvi, slide the Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
Go outdoors to an open area, out of
garages, and away from tall buildings.
Stop your vehicle, and turn on the nüvi.
Acquiring satellite signals may take a
few minutes.
The bars indicate GPS satellite
strength. When one bar is green, the nüvi
has acquired satellite signals. Now you
can select a destination and navigate to
it. For more information about GPS, see
page 50 and visit www.garmin.com/
aboutGPS.
Step 4: Use the nüvi
➊ ➋ ➌ ➍
➎
➏➐➑
➒
➊ GPS satellite strength.
➋ Bluetooth
®
technology status.
➌ Battery status.
➍ Current time; touch to change time
settings.
➎ Touch to nd a destination.
➏ Touch to use the tools such as media
players, settings, and Help.
➐ Touch to adjust the volume.
➑ Touch to make a call when connected
to a compatible mobile phone (nüvi
715, 765, and 775 only).
➒ Touch to view the map.