Garmin 715 - Changing the Proximity Points Settings

DRAFT
42 nüvi 705 Series Owner’s Manual
Customizing the nüvi
NOTE: The nüvi’s PIN code (or
passkey) is 1234.
Drop—select the phone you want to
disconnect, and touch Yes.
Remove
—select the phone you want
to delete from the nüvi’s memory, and
touch Yes.
Bluetooth—enable and disable the
Bluetooth component. The Bluetooth
icon appears on the Menu page if the
Bluetooth component is enabled. To
prevent a phone from automatically
connecting, select Disabled.
Friendly Name
—enter a friendly name
that identies your nüvi on devices with
Bluetooth technology. Touch Done.
Troubleshoot—scroll through the
list containing compatible devices.
If your phone is not in this list, go to
www.garmin.com/bluetooth for more
information.
Restore
—restore the original Bluetooth
settings. This does not clear the pairing
information.
Changing the Proximity
Points Settings
You must have proximity points (such as
custom POIs, a safety camera database,
or a TourGuide
®
) loaded to adjust the
proximity point settings. See page 47.
Touch Tools > Settings > Proximity
Points.
Proximity Alerts—touch Change
to turn on or off the alerts when you
approach custom POIs or safety cameras.
TourGuide
—set how you want the
audio for TourGuide to be activated.
Select Auto Play to hear the complete
tour as programmed, Prompted to show
the speaker icon on the map when
tour information is available during your
route, or Off.
Restore
—restore the proximity points
settings.