EasyManuals Logo

Garmin DA42 G1000 User Manual

Garmin DA42 G1000
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-06 Rev. A
58
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
GIA 63 MESSAGE ADVISORIES (CONT.)
Message Comments
GPS1 SERVICE
– GPS1 needs service.
Return unit for repair.
A failure has been detected in the GPS1
and/or GPS2 receiver. The receiver may still
be available. The G1000 system should be
serviced.
GPS2 SERVICE
– GPS2 needs service.
Return unit for repair.
NAV1 SERVICE
– NAV1 needs service.
Return unit for repair.
A failure has been detected in the NAV1
and/or NAV2 receiver. The receiver may still
be available. The G1000 system should be
serviced.
NAV2 SERVICE
– NAV2 needs service.
Return unit for repair.
NAV1 RMT XFR
– NAV1 remote
transfer key is stuck.
The remote NAV1 and/or NAV2 transfer
switch is stuck in the enabled (or “pressed”)
state. Press the transfer switch again to cycle
its operation. If the problem persists, the
G1000 system should be serviced.
NAV2 RMT XFR
– NAV2 remote
transfer key is stuck.
G/S1 FAIL – G/S1 is inoperative.
A failure has been detected in glideslope receiver
1 and/or receiver 2. The G1000 system should be
serviced.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs service.
Return unit for repair.
A failure has been detected in glideslope receiver
1 and/or receiver 2. The receiver may still be
available. The G1000 system should be serviced
when possible.
G/S2 SERVICE – G/S2 needs service.
Return unit for repair.
GIA 63W MESSAGE ADVISORIES
Message Comments
GIA1 CONFIG
– GIA1 config error.
Config service req’d.
The GIA1 and/or GIA2 configuration settings do
not match backup configuration memory. The
G1000 system should be serviced.
GIA2 CONFIG
– GIA2 config error.
Config service req’d.
GIA1 CONFIG
– GIA1 audio config
error. Config service req’d.
The GIA1 and/or GIA2 have an error in the audio
configuration. The G1000 system should be
serviced.
GIA2 CONFIG
– GIA2 audio config
error. Config service req’d.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin DA42 G1000 and is the answer not in the manual?

Garmin DA42 G1000 Specifications

General IconGeneral
Display Size10.4 inches
Resolution1024 x 768 pixels
Display TypeLCD
Primary FunctionPrimary Flight Display (PFD) and Multi-Function Display (MFD)
ManufacturerGarmin
CategoryAvionics Display
AircraftDiamond DA42
SystemG1000
Power Requirements28 VDC

Related product manuals