Garmin Forerunner 620 - Auto Lap Configuration; Auto Pause Setup; Training Calendars

The Garmin ® logos (on the module and the strap)
should be right-side up.
2 Wet the electrodes (2) on the back of the strap to
create a strong connection between your chest and the
transmitter.
3 If the heart rate monitor has a contact patch @,wet
the contact patch .
4 Wrap the strap around your chest , and connect the
strap hook @ to the loop @.
The Garmin logos should be right-side up .
5 Bring the device within 10ft. (3 m) of the heart rate
monitor.
After you put on the heart rate monitor , it is active and
sending data .
11