Garmin GPSMAP 1042xsv - User Manual

GPSMAP
®
10X2/12X2 SERIES
INSTALLATION INSTRUCTIONS
Important Safety Information
WARNING
Failure to follow these warnings, cautions, and notices could result in personal injury, damage to the vessel or
device, or poor product performance.
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or
product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product
specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product
warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
To avoid possible personal injury or damage to the device and vessel, disconnect the vessel's power supply
before beginning to install the device.
To avoid possible personal injury or damage to the device or vessel, before applying power to the device, make
sure that it has been properly grounded, following the instructions in the guide.
NOTICE
For the best possible performance, the device must be installed according to these instructions.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
Read all installation instructions before proceeding with the installation. If you experience difficulty during the
installation, contact Garmin
®
Product Support.
Contacting Garmin Support
• Go to support.garmin.com for help and information, such as product manuals, frequently asked questions,
videos, and customer support.
• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.
Software Update
You may need to update the chartplotter software after installation. For the instructions on how to update the
software, see the owner's manual at www.garmin.com/manuals/GPSMAP10x2-12x2.
GUID-BF1B0D74-52BF-4F5B-938B-9A7556F36E8C v4October 2020

Summary

Important Safety Information

Mounting Procedures

Bail Mounting the Device

Step-by-step instructions for mounting the device using a bail bracket.

Flush Mounting the Device

Step-by-step instructions for flush mounting the device into a dashboard.

Connections and Data

Power;NMEA 0183 Cable

Details about the wiring harness, its functions, and wire color coding for power and NMEA 0183.

Connecting the Wiring Harness to Power

Instructions for connecting the device's wiring harness to the boat's power supply.

Garmin Marine Network Considerations

Guidelines for connecting devices to the Garmin Marine Network.

NMEA 2000 Considerations

Information and precautions for connecting the device to an NMEA 2000 network.

NMEA 0183 Connection Considerations

Guidelines for connecting the device to NMEA 0183 devices.

NMEA 0183 Device Connections

Diagrams and details for connecting the device to other NMEA 0183 devices.

NMEA 0183 and Power Cable Pinout

Pinout details for the NMEA 0183 and power cable.

Lamp and Horn Connections

Instructions for connecting optional lamps or horns for alerts.

Composite Video Considerations

Information on connecting composite video input to the device.

Specifications and Data Protocols

10 x2 Models Specifications

Dimensions, display size, weight, and power specifications for the 10x2 models.

12 x2 Models Specifications

Dimensions, display size, weight, and power specifications for the 12x2 models.

NMEA 2000 PGN Information

Lists NMEA 2000 Parameter Group Numbers (PGNs) for transmit and receive.

NMEA 0183 Information

Details NMEA 0183 sentences transmitted and received by the device.

Garmin GPSMAP 1042xsv Specifications

General

Water Rating	IPX7
GPS	Yes
Sonar Support	Yes
Chartplotting	Yes
Wireless Connectivity	Wi-Fi
Power Input	10-32 VDC
Networking	NMEA 2000
Transducer Included	No
Mounting Options	Flush