Connections
From To Cable
HDMI source's HDMI OUT port Chartplotter's HDMI IN port
Garmin HDMI Cable
Chartplotter's HDMI OUT port Monitor's HDMI IN port
Garmin HDMI Cable
Chartplotter's USB port HDMI source's USB port
GPSMAP USB OTG adapter cable to power the
HDMI source, if possible (2.5 W maximum)
Composite Video Considerations
This chartplotter allows video input from composite video sources using the port labeled CVBS IN. When
connecting composite video, you should observe these considerations.
• The CVBS IN port uses a BNC connector. You can use a BNC to RCA adapter to connect a composite-video
source with RCA connectors to the CVBS IN port.
• Video is shared across the Garmin Marine Network, but it is not shared across the NMEA 2000 network.
15
To Next Page