To Next PageTo Next Page
Need help?Do you have a question about the Garmin GTN Xi Series and is the answer not in the manual?
Accessing setup page via Wi-Fi datacard for configuration.
Procedures for updating databases manually via SD card or wireless transfer.
Conditions and procedures for automatic database updates.
Wireless database transfer from a mobile device while aircraft is on ground.
Pairing portable electronic devices via the Garmin Pilot app.
Viewing and managing connected Bluetooth devices and their status.
Configuring Wi-Fi connection for database updates and streaming.
Interface for accessing VHF COM transceiver controls and frequencies.
Adjusting radio volume and using squelch functions.
Swapping active and standby frequency values.
Tuning radio frequencies on both units from a single navigator in dual installations.
Tuning, transferring, and selecting navigation frequencies.
Activating the NAV IDENT function and audible Morse code tones.
Annunciations and alerts indicating NAV radio failures.
Interface for managing audio panel functions like split mode and volume.
Controls and modes for communication between aircraft occupants.
Using spoken commands to control the GTN Xi and audio panel.
Interface for accessing transponder controls and squawk codes.
Available transponder modes: Standby, On, and Altitude Reporting.
Annunciations and alerts indicating transponder failures.
Accessing ADS-B Out controls via the ADS-B key.
Replacing identifying information with randomized numbers for privacy.
Annunciations and alerts indicating GDL 88 failures.
Configuring CDI scale, time format, keyboard type, and radio settings.
Setting airspace and arrival alerts.
Setting display units for various parameters.
Specifying criteria to determine which airports appear on the Nearest Airport page.
Customizing page shortcuts for knob access.
Interpreting colors and locations of alert messages.
Display of pop-up windows for terrain or traffic warnings.
Layout and controls for traffic alert pop-up windows.
Recording flight parameters, overwriting old files, and exporting logs.
Procedures for exporting flight data logs to an SD card.
Automatic streaming of logged flight data to Garmin Pilot app via Flight Stream 510.
General
