>÷ŤŤÐŕŤ÷ð
ƮƶƭǜƭƯưƯƴǜƭư÷ŽNj ēħĸŤǦŚ>Ūēð÷ ƯǜƱư
a®
=ŕ÷ŔŪ÷įêƄŪįēįĊș÷ħ÷êŤēĸį
"ēŕ÷êŤŪįēįĊ
>aƳƲƭ´ē+G+
Due to spatial considerations, only one frequency control may display at a time.
COM is the default frequency control option.
®GXX+¯GCDž
>aƳƲƭ´ēǑƴƲƭ´ē
Navigation frequency tuning, transfer, and selection
functions are identical to those used for communication
frequencies.
You may enter a standby NAV frequency
using the data entry keys on the NAV
Standby control panel or by turning the
dual-concentric control knob.
GTN Xi automatically decodes Morse
code and displays the Ident for the active
frequency above it.
The reverse frequency lookup identifier
displays below the frequency value.
Frequency lookup results are based on
GPS position and database information.
Freque
ncy Identifier
from Morse Code
Frequency Identifier
Based on GPS
Position
To Next Page
Loading...
Need help?
General
