Garmin GTN Xi Series User Manual

ƯǜƱƱ ēħĸŤǦŚ>Ūēð÷ ƮƶƭǜƭƯưƯƴǜƭư÷ŽNj
>÷ŤŤÐŕŤ÷ð
a"µa®=++aµ+aµ
=ŕ÷ŔŪ÷įêƄ÷ħ÷êŤēĸį
To change the standby frequency:
1. Push the dual concentric control knob
repeatedly until the standby NAV frequency
window is activated.
2. Rotate the inner and outer knobs or tap
STBY and enter the frequency using the
data entry keys.
Upon selection, the standby frequency window
remains active for approximately 30 seconds.
You can tap XFER to assign the standby value
as the active frequency, or se
lect the active NAV
frequency window to flip/flop values.
Active NAV
Frequency
Standby NAV
Frequency
aÐŽēĊÐŤēĸįĉŕ÷ŔŪ÷įêē÷Ś
ēįêħŪð÷Dž
 Glideslope
 Localizer
 VOR
The Find key provides access to multiple search tabs. Each tab
displays a list of selectable identifiers based on specific criteria.

Garmin GTN Xi Series Specifications

General

Brand	Garmin
Model	GTN Xi Series
Category	GPS
Language	English