34 iQue
®
M4 Operating Instructions
GETTING CONNECTED > CONNECTING TO THE INTERNET FROM A MODEM
To set up a work modem connection:
1. Tap and then Settings.
2. Tap the Connections tab and then the Connections icon.
3. Under My Work Network, tap Add a new modem connection.
4. Complete the setup as described on the previous page.
Connecting to your ISP
Open Messaging, Pocket Internet Explorer, or MSN Messenger. Your iQue M4 automatically begins connecting. After you connect,
you can send and receive e-mail, browse Web pages, and send and receive instant messages.
To connect manually to your ISP:
1. Tap , Settings, the Connections tab, and the Connections icon.
2. Under My ISP or My Work Network, tap Manage Existing Connections.
3. Tap and hold on the applicable dial-up settings and select Connect. To delete the connection, tap Delete.
Establishing Dialing Rules for Modems
To create dialing rules for your modem connection:
1. Tap , Settings, the Connections tab, and then Connections.
2. Tap the Advanced tab and then tap Dialing Rules.
3. To enable dialing rules, tap to check the box next to Use dialing rules. Then tap OK to acknowledge the message that appears.
4. Tap to select Home or Work (the dialing rules apply to your ISP or your Work connection, respectively).
To Next Page
Loading...
Need help?
General