nüvi 465 owner’s manual 17
Making Hands-Free Phone Calls
Pairing Using the nüvi Settings
1. From the Main menu, touch Tools >
Settings > Bluetooth > Add.
2. Enable the Bluetooth component
on your phone, and enable Find
Me/Discoverable/Visible mode. These
settings might be in a Bluetooth, a
Connections, or a Hands-free menu.
3. Touch
OK on the nüvi.
4. Select your phone, and touch
OK.
5. Enter the nüvi Bluetooth PIN (
1234) in
your phone.
When your phone is connected to your
nüvi, you are ready to make phone calls.
Touch Phone on the Main menu to access
the Phone menu.
When you turn on the nüvi, it tries to
connect to the last phone to which it was
connected.
Receiving a Call
When you get a call, the Incoming Call
window opens. Touch Answer to answer
the call. Touch Ignore to ignore the call
and stop your phone from ringing.
The internal microphone is in the front of
the nüvi; speak normally.
In a Call
NOTE: Depending on the screen that
appears on your nüvi, the In Call icon
could look different.
During a call, the In Call icon
appears. Touch > End Call to hang
up. Touch > Call Options for the
following options:
Touch Tones—displays a keypad
page so that you can use automated
systems, such as voice mail.
•
To Next Page
General
