nüvi 705 Series Owner’s Manual 15
Where To?
Touch to switch between a 3D
(three-dimensional) map and a 2D
(two-dimensional) map.
Touch to rotate the viewing angle
in 3D view.
As you zoom out, the map changes to
a digital elevation map showing the
contours of the area.
Zoom far out to view a globe. Touch
and spin the globe to quickly nd
different areas of the world.
NOTE: You can only see detailed map
information for areas that you have
maps loaded on your nüvi.
•
•
•
•
Entering Coordinates
If you know the geographic coordinates
of your destination, you can use your
nüvi to navigate to your destination
using the latitude and longitude
coordinates (or other coordinate
formats). This can be especially helpful
when geocaching.
1. Touch Where To? > Coordinates.
2. Touch Format to select the correct
coordinate format for the type of map
you are using.
3. Touch a direction eld to select a new
direction.
4. Touch a numeric eld to enter the
coordinates, and touch Done.
5. After you have entered the proper
coordinates, touch Next.
To Next Page
Loading...
Need help?
General
