Garmin nuvi 705 series Quick Start Manual

Cradle
Power cable
Step 1: Mount the nuvi
1. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
2. Place the suction cup on the windshield.
3. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
4. Snap the cradle onto the suction cup
arm.
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nOvi into the
cradle.
3
7. Tilt the nOvi back until it snaps into place.
8. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
9. If you are using a traffic receiver in
Europe, secure the antenna on the
traffic receiver to the windshield using
the suction cups. (The traffic receiver is
included in some nOvi packages.)
Step 2: Configure the nuvi
To turn on your ntivi, slide the 6 Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the nOvi.

Garmin nuvi 705 series Specifications

General

Brand	Garmin
Model	nuvi 705 series
Category	Car Navigation system
Language	English