Using the apps
Group Ride
The Group Ride app allows you to coordinate rides and communicate with nearby riders using preset text
messages, live map locations and voice communications.
NOTE: before you can use the Group Ride app, you must install a Group Ride accessory. Go to garmin.com to
purchase a Group Ride accessory.
Starting a Group Ride
You can create a group ride that allows you to choose the group radio channel, view and remove riders who join
your group ride and set the group ride name.
1 From the main menu, select Group Ride > Start a Group Ride.
2 Enter your rider name and select Done.
3 If necessary, select the radio channel and select Next.
4 Enter the ride name and select Done.
As riders join your group ride, their names appear on the list.
5 Select Start.
The group ride begins after all riders sync with the group ride.
Joining a Group Ride
You can join a nearby group ride that was created by another rider.
NOTE: for some product models, the Group Ride app is located in the apps menu.
1 From the main menu, select Group Ride > Nearby Group Rides.
2 Select a nearby group ride and select Join.
Rejoining a Recent Group Ride
You can rejoin any of your ten most-recent group rides.
1 From the main menu, select Group Ride > Recent Group Rides.
2 Select a recent group ride and select Join.
Adding Riders to a Group Ride
You can add riders to a group ride that is already in progress.
1 From the main menu, select Group Ride.
2 If necessary, select .
3 Select Add.
As new riders join the group ride, they appear on the list.
4 Select Continue.
Using the apps 39
To Next Page
Loading...
Need help?
General
Weight and Dimensions
