Need help?Do you have a question about the GARO GNM1D-RS485 and is the answer not in the manual?
General| Model | GNM1D-RS485 |
|---|---|
| Manufacturer | GARO |
| Communication Interface | RS485 |
| Protection Class | IP20 |
| Operating Temperature | -25 to +55 °C |
| Function | Energy Meter |
Connect the DLM meter using shielded twisted pair cable to the wallbox.
Emphasizes safety during installation, including power disconnection and authorized personnel.
Details specific cross-sections and torque values for power cable connections.
Describes how to interact with the meter's touch interface for navigation and adjustments.
Explains recommended Modbus addresses (002, 100, 101) for different installation types.
Step-by-step guide to setting the Modbus address using the meter's touch controls.
Instructions for setting or confirming the Baudrate for Modbus communication.
Guide to setting or verifying Parity and Stopbit parameters for Modbus communication.
Procedure to exit the programming mode after completing settings.
To Next Page
