Need help?Do you have a question about the Garrett TreasureHound and is the answer not in the manual?
Securely attach the beam to the front coil using captive thumb screws.
Connect the beam to the rear coil receptacle with a screw and washer.
Route cables and mount the detector housing onto the stem.
Securely attach the beam to the front coil using captive thumb screws.
Connect the beam to the rear coil receptacle with a screw and washer.
Route cables and mount the detector housing onto the stem.
General| Brand | Garrett |
|---|---|
| Model | TreasureHound |
| Category | Metal Detector |
| Language | English |
To Next Page
