IC7 USER MANUAL
5
Smart App
The GarwIC7 instrument cluster is configured via a smart device app
Available for Android and iOS
Search app stores for GARWICX
First step is to connect to the IC7 Wi-Fi network
1. Insert the Wi-Fi adapter into any USB socket and then ensure the IC7 is
off by turning off ignition, close the door and wait 1 minute.
The next time the dash is powered the Wi-Fi adapter will be initialised
2. Once initialised the Wi-Fi adapter should blink steadily and a new
network called “Garw” should be available
3. Connect to this network with your smart device using the password
garwicxX
4. Launch the app , when successfully connected the app will display the
battery level and fuel level of your vehicle
The settings of the IC7 are accessed and modified using the directional
arrows on the app.
To Next Page
Loading...