IC7 USER MANUAL
7
System settings
Configuration of the IC7 is done through the system settings
Press and hold left or right arrow until the system settings appear
Left and right arrow to move between parameters
Up and down arrows to change or increment/decrement the parameter
Move between screens by highlighting “NEXT” in the top right of the
screen and pressing up/down for next/previous screen
Each page covers various aspects of the IC7 and allows global parameters
to be configured
There are 4 pages available in Basic view
Page 1: Real time data, Calculated gear, Software updating
Page 2: Reserved
Page 3: Driving screens configuration
Page 4: Vehicle configuration
To Next Page
Loading...