GASLAND chef Pro Series - Page 49

www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
48
Error
Code
Error Code
Description
Cause for the
Error Code
After Sales
Service
E10
The main control chip
SH79F326 is broken
internally.
E14
NTC on the main
control circuit board is
open or shorted.
The main control chip
SH79F326 is broken
internally.
Replace the circuit
board.
NTC on the main control
circuit board is broken.
Replace the cricuit
board.
E15
The ambient
temperature of the
main control circuit
board is too high.
Theroom ambient
temperature is too high,
causing the oven
temperature torise
too high.
Indoor ventilation
and cooling.
E16
Food probe short
cricuit.
The electronic
components of the, circuit
board are broken.
Replace the,
circuit board.
Food probe is broken.
Replace the food
probe.
The food probe connector
is broken.
Replace the food
probe connector.
The NTC thermistor is
aging and invalid,
causing the temperature
to be inaccurate.
Replace the,
circuit board.