GASLAND chef Pro Series - Page 48

www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
47
support@gaslandchef.com
1 (844) 538-7890
Error
Code
Error Code
Description
Cause for the
Error Code
After Sales
Service
E7
When the oven is
heating, the
temperature keeps
falling.
The electronic
components of the
circuit board are broken.
Replace the circuit
board.
E8
The oven door can
not be locked.
The electronic
components of the
circuit board are broken.
Replace the circuit
board.
E9
AC power 120V/240V
frequency 50Hz/60Hz
is abnormal.
The electronic
components of the
circuit board are broken.
Replace the circuit
board.
AC power 120V/240V
frequency 50Hz/60Hz
1s abnormal.
Power off for 30
seconds and
power on again.
The latch motor is
broken.
Replace the latch
motor.
lf it is in the unlocking
process, the micro
switch at the S2 position
of the door latch is
broken.
Replace the
switch at door
latch S2 position.
lf it is in the unlocking
process, the micro
switch at the S3 position
of the door latch is
broken.
Replace the switch
at door latch S3
position.
Electric range only:
heating elements
broken.
Replace the
heating element.
The oven door switch is
broken, causing the
circuit to misjudge that
the door is open, so the
oven stops heating.
Replace the oven
door switch.